Features:

ASSEMBLED IN CANADA

Discover the exceptional quality and craftsmanship of our HOC8A Wood Chipper, proudly assembled, welded and packaged in Canada. This robust chipper exemplifies Canadian manufacturing excellence, combining top-grade materials with meticulous assembly processes. Each HOC8A is built with precision and care, ensuring it meets the highest standards of durability and performance. The Canadian assembly ensures close attention to detail and adherence to stringent quality control, resulting in a reliable, efficient, and long-lasting wood chipping solution. Choose our HOC8A Wood Chipper for a product that not only excels in functionality but also supports Canadian craftsmanship, bringing you the best in wood chipping technology.

CANADIAN DUAL INFEED ROLLERS + FLYWHEEL

The Canadian Made large diameter In-Feed Rollers measuring over 6 inches efficiently pulls material into the Canadian Made Flywheel at approximately 58 feet per minute. The dual rollers are made of high carbon steel chisel teeth and are spaced out to prevent debris buildup. The roller's self-cleaning ability enables the 165 lbs. of down pressure to concentrate on fewer teeth, thereby increasing their grip. HOCs in-feed rollers aggressively grab any size limb up to 8 inches in diameter without wrapping around the roller, an extremely effective feature.

STRONG GEAR BOX AND DRIVE AXLE

The HOC in-feed system employs a heavy-duty gear box filled with oil and driven by strong belts. This system enhances torque and transfers power to the upper feed roller through an extreme Heavy Duty Drive Axle. The clutch is made of Canadian Solid Steel and machined with precision to ensure its proper operation. With this in-feed system, material can be fed at a rate of up to 58 ft./min.

360 DEGREE ADJUSTABLE CHUTE

The HOC8A chipper features a North American made discharge chute that can easily rotate 360 degrees. The chute is equipped with a handle that allows you to effortlessly direct the chips into a truck or trailer without having to reposition the entire machine.

WIDE ANGLED SUPPORT BASE + SKID SHOES + DRAW BAR

The HOC8A base legs can be adjusted to fit a wide range of tractors. The adjustable base legs + adjustable draw bar make it incredibly easy to achieve the required PTO shaft angle. HOC PTO Wood Chippers can be adjusted to fit tractors with PTO heights ranging from 18" to 30". To ensure the machine remains stable and doesn't sink into soft ground during use, the HOC8A features a wide footprint skid support base with an angled end to prevent ground penetration.

EFFECTIVE SUCTION SYSTEM

The flywheel chamber of the HOC8A wood chipper provides a powerful suction. This suction draws air into the chamber and, when combined with the fan blades on the back of the flywheel, effectively expels the wood chips from the machine. This design ensures that the discharge chute stays unobstructed and minimizes the risk of a jam.

MAIN SHAFT SUPPORTED BY 3 BEARINGS

The main shaft of the HOC PTO Wood Chippers has a diameter of 2 inches and passes through the flywheel housing, supported by one pillow block and two flange bearings. This design contributes to the accuracy of the flywheel's rotation and provides extra strength.

CLEAR VINYL BAFFLE

Enhance your wood chipping experience with our wood chipper's Clear Vinyl Baffle feature. This innovative addition is designed for improved safety and operational visibility. The transparent baffle allows you to monitor the chipping process while effectively containing debris and reducing the risk of flying wood chips. Its durable vinyl construction withstands the rigors of chipping, providing a long-lasting barrier. This clear baffle is an essential safety feature, ensuring a clearer view and added protection, making your wood chipping tasks safer, more efficient, and user-friendly.

FLYWHEEL HOUSING

The flywheel housing of HOC’S chippers are constructed with 8mm thick heavy gauge structural steel. This thicker plate offers added strength and rigidity as the flange bearings are mounted on it.

EASY KNIFE ACCESS PANELS

Maintain and service your wood chipper with ease, thanks to our Easy Knife Access Panels. Designed for convenience and efficiency, these panels provide quick and straightforward access to the chipper's knives for routine maintenance or replacement.

This feature significantly reduces downtime, allowing you to swiftly get back to your chipping tasks. The panels are engineered for user-friendly operation, ensuring that even those with basic mechanical knowledge can safely access the knives. Regular maintenance is crucial for optimal chipper performance, and our Easy Knife Access Panels make it a hassle-free process, ensuring your wood chipper continues to operate at peak efficiency.

AUTO-FEED STOP BAR + FEED ROLLER ASSIST HANDLE

Ensuring safety is a top priority for HOC. HOC 8" PTO chippers feature an auto-feed stop safety bar located on the top of the in-feed bin that is easy to activate. In the event of an emergency or to clear the in-feed bin, the safety bar stops the in-feed rollers.

The Feed Roller Assist Handle on the HOC chipper is designed to be easily accessed from either side of the machine. Additionally, the center lift point enables the use of stronger tension springs, which enhances the chipper's in-feed ability.

PTO SHAFT WITH SHEAR BOLT PROTECTION

The HOC8A comes equipped with a versatile PTO shaft, adjustable from 40 to 51 inches, and features shear bolt protection. This safeguard is designed to protect both the machine and operator from potential harm during blockages or overloading incidents, ensuring safe and reliable operation.

HOC8A 8 Inch PTO Wood Chipper - With Auto Infeed

The HOC8A 8 Inch Wood Chipper with Auto Infeed is a durable PTO-driven attachment designed for tractors. It's compact and an absolute workhorse. Featuring USA made knives among many other North American parts the unit is welded, assembled, and tested in Canada prior to every shipment.

Features

STRENGTH: HOC8A chippers are built with Canadian made Structural Steel, CNC plasma cut, and meticulously welded in Canada boasting impressive strength in their design. Our design includes a 2" diameter main shaft supported by three bearings (1 pillow block and 2 flange bearings), which adds a significant amount of strength.
LARGE DIAMETER DUAL INFEED ROLLERS The large diameter in-feed rollers measuring over 6 inches efficiently pulls material into the flywheel at approximately 58 feet per minute. The dual rollers are made of high carbon steel chisel teeth and are spaced out to prevent debris buildup. The roller's self-cleaning ability enables the 165 lbs. of down pressure to concentrate on fewer teeth, thereby increasing their grip. HOCs in-feed rollers aggressively grab any size limb up to 8 inches in diameter without wrapping around the roller, an extremely effective feature.
STRONG GEAR BOX AND DRIVE AXLE The HOC in-feed system employs a heavy-duty gear box filled with oil and driven by strong belts. This system enhances torque and transfers power to the upper feed roller through an extreme duty drive axle. The clutch is made of solid steel and machined with precision to guarantee its proper operation. With this in-feed system, material can be fed at a rate of up to 58 ft./min.
360 DEGREE DISCHARGE CHUTE The HOC8A chipper features a discharge chute that can easily rotate 360 degrees. The chute is equipped with a handle that allows you to effortlessly direct the chips into a truck or trailer without having to reposition the entire machine.
WIDE ANGLED SUPPORT BASE To ensure the machine remains stable and doesn't sink into soft ground during use, the HOC8A features a wide footprint skid support base with an angled end to prevent ground penetration.
EFFECTIVE SUCTION SYSTEM The flywheel chamber of the HOC8A wood chipper provides a powerful suction. This suction draws air into the chamber and, when combined with the fan blades on the back of the flywheel, effectively expels the wood chips from the machine. This design ensures that the discharge chute stays unobstructed and minimizes the risk of a jam.
STEEL BEARINGS The main shaft on the HOC chipper is supported by three shock-resistant cast steel bearings. These bearings are located on either side of the flywheel housing and are supported by flange bearings, making this unit highly durable and reliable.
HIGH ADJUSTABLE TENSION SPRINGS The HOC chipper features high tension springs and a unique adjustment mechanism that provides a complete range of variable down pressure to accommodate branches of varying hardness. Users can adjust the upper roller down pressure by cranking up the tension to achieve 165 lbs. of down pressure!
EASY KNIFE ACCESS PANELS Changing the HOC chipper knives can be done very easily, taking only a few minutes.
HEAVY DUTY DRIVE V-BELTS HOC chippers are fitted with high-strength drive v-belts, measuring 5/8 inches in width, for maximum durability. These specialized belts transmit more torque than traditional smooth v-belts.
AUTO-FEED STOP BAR Ensuring safety is a top priority for HOC. HOC 8" PTO chippers feature an auto-feed stop safety bar located on the top of the in-feed bin that is easy to activate. In the event of an emergency or to clear the in-feed bin, the safety bar stops the in-feed rollers.
FEED ROLLER ASSIST HANDLE The handle on the HOC chipper is designed to be easily accessed from either side of the machine. Additionally, the center lift point enables the use of stronger tension springs, which enhances the chipper's in-feed ability.
CLEAR VINYL BAFFLE The transparent vinyl baffle safeguards the operator from chips being blown back, while also enabling the operator to observe the activities inside the hopper.
ADJUSTABLE BASE LEGS The HOC8A base legs can be adjusted to fit a wide range of tractors, making it easier to achieve the required PTO shaft angle. HOC PTO Wood Chippers can be adjusted to fit tractors with PTO heights ranging from 18" to 30".
MAIN SHAFT SUPPORTED BY 3 BEARINGS The main shaft of the HOC PTO Wood Chippers has a diameter of 2 inches and passes through the flywheel housing, supported by one pillow block and two flange bearings. This design contributes to the accuracy of the flywheel's rotation and provides extra strength.
FLYWHEEL HOUSING The flywheel housing of HOC’S chippers are constructed with 8mm thick heavy gauge structural steel. This thicker plate offers added strength and rigidity as the flange bearings are mounted on it.
ADJUSTABLE KNIVES HOC Wood Chippers come with an adjustable bed knife to guarantee that the appropriate knife gap is attained. This capability allows users to regulate the space between the flywheel knife and the bed knife to ensure that the required distance is maintained even after knife sharpening or knife replacement.
RUST RESISTANT POWDER COAT HOC Wood Chippers are coated with a powder finish that is baked on to avoid rust.
ASSURANCE HOC chippers are designed to be highly durable and able to withstand heavy use. With years of experience and over 500,000 units in service today, we are confident that our chippers can handle even the toughest projects.
MACHINE ARRIVES 90% ASSEMBLED HOC chippers are delivered to customers almost fully assembled in a sturdy steel crate. All you need to do is attach the in-feed bin, discharge chute, PTO shaft (which is included), and connect the chipper to your tractor. Our machines undergo a thorough 25-point pre-inspection prior to being shipped out. You can follow the illustrated, user-friendly assembly manual and be done in no time!
AFTER SALES SERVICE HOC has a team of certified technicians who carefully examine every machine before shipping to guarantee a problem-free experience. HOC provides a 3 Year Warranty on all PTO Wood Chippers quite unlike other dealers.

SPECS

Max Chipping Capacity: 8 Inch
3 Pt. Hitch Mount
Minimum HP Requirement: 19 PTO HP
Infeed Opening: 8 x 8 Inch
Infeed Rate 58 Ft. / Min
Number of Infeed Rollers: 2
Composition of Infeed Rollers: 6.25" Diameter Canadian Steel
Quantity of Blades: 2-Reversible USA Made, 1 Bed Knife (Anvil) USA Made
Flywheel: 220 lb 24" Diameter Made In USA
Flywheel Speed: 1200 RPM
In-Feed System: Auto Feed Driven
Height of Output Funnel 75 in
Attachment: 3 Point Hitch
Compatibility: CAT1 or CAT2
Shaft Speed: 540 RPM
Diameter of Shaft: 2 Inch
3-Heavy Duty Cast Steel Main Shaft Bearings
5 Heavy Duty Cogged Drive Belts
Extendable PTO Shaft: 40-51 Inch
Net Weight: 355.5 kg / 782.1 lbs
Gross Weight: 375.5 Kg / 826 lbs
Item Dimensions: L=75" x W=33" x H=75"
Package Dimensions L=48" x W=36" x H=49"

Shipping:

This product qualifies for Free Shipping. There are no minimum purchase requirements or hidden fees. The price you see is the price you pay, without any surprises at checkout.

Quality assurance is our top priority. Before any item leaves our warehouse, it undergoes a Complimentary Pre-Inspection. This process ensures that what you receive is exactly what you ordered, in perfect condition.

Time is precious, and we respect yours. Our Unparalleled Speed in processing and shipping orders means you won't have to wait long for your purchase. Our efficient logistics team works tirelessly to ensure that your order is dispatched promptly and arrives well within the estimated delivery time of 3-5 Days.

Above all, we prioritize your Peace of Mind. From secure packaging to reliable delivery partners, every step of the shipping process is designed to ensure your order reaches you safely and without any hassle. Plus, our customer service team is always here to help with any questions or concerns, providing you with a worry-free shopping experience.

Warranty:

At HOC, we meticulously select our dealers from a pool of globally renowned entities, ensuring that we offer only the best to you. Our commitment to excellence is further reflected in our offering of the most Comprehensive Warranty Periods among equipment dealers across North America.

This approach allows you to make your selection with a sense of confidence and assurance, knowing well that your purchase is under the protection of a warranty that's as steadfast and dependable as the product itself. We invite you to experience the peace of mind and trust that come with choosing HOC, where your satisfaction and security are our topmost priorities.

To view the specific warranty period applicable to this product, and to delve into the details of your protection, please click the link below.

View details -> clp056qca000001s6e8vz9p2x

Reviews:

The chipper is great

The chipper is great!! The shipping is slower then 3 to 5 days like it shows when you purchase for where I'm located. I drove 2 hours to pick it up to save time. But over all I am a happy costumer