Billy Goat BC26 Series Outback Fixed Deck 26" Brush Cutter, Briggs & Stratton and Honda Engine, Heavy-Duty Mechanical Transaxle

The Billy Goat BC26 Series Outback Fixed Deck 26" Brush Cutter is a commercial-duty walk-behind brush cutter designed for landscapers, property maintenance crews, municipalities, landowners, and contractors clearing heavily overgrown areas. Available with Briggs & Stratton or Honda engine configurations, it combines a 26 in (66.0 cm) rigid cutting deck with a heavy-duty mechanical transaxle featuring three forward speeds and reverse. Built for demanding vegetation management, the BC26 can tackle brush up to 6 ft (1.83 m) high, grass and weeds over 8 ft (2.44 m) tall, and saplings up to 2 in (5.1 cm) in diameter.

KEY FEATURES

• REINFORCED IN FOUR DIRECTIONS FOR MAXIMUM DURABILITY AND SAFETY, SO YOU CAN KEEP CUTTING IN THE HARSHEST CONDITIONS: The BC26 heavy-duty blade spindle is reinforced in four directions to withstand demanding brush-clearing conditions. Its robust construction supports reliable cutting through dense vegetation, tall weeds, heavy brush, and saplings while providing the durability required for commercial applications.
• HEAVY-DUTY MECHANICAL TRANSAXLE: The mechanical transaxle combines the transmission and differential into one sealed package, eliminating external linkages that could snag on brush. Three forward speeds and reverse allow operators to adjust travel speed to vegetation density, terrain, and maneuvering requirements.
• RIGID DECK: The commercial-duty 26 in (66.0 cm) fixed deck does not articulate, helping prevent pulling and snagging when crossing hills, holes, and uneven ground. Its rigid construction provides excellent stability when working through deep vegetation and challenging overgrown areas.
• RUBBERIZED REAR DECK TRIM: Flexible rubberized trim at the rear of the cutting deck provides improved clearance when reversing around stumps and other obstacles. This feature makes repositioning easier when working in heavily wooded, uneven, or overgrown environments.
• 26 IN (66.0 CM) COMMERCIAL-DUTY CUTTING WIDTH: The BC26 clears a 26 in (66.0 cm) path with each pass, providing an effective balance between cutting productivity and maneuverability. The wide rigid deck is well suited for fields, meadows, trails, and neglected properties where conventional mowing equipment may not be appropriate.
• HEAVY BRUSH CUTTING CAPABILITY: The reinforced cutting system is designed to tackle brush up to 6 ft (1.83 m) high and grass and weeds over 8 ft (2.44 m) tall. This allows operators to reclaim heavily overgrown areas with fewer preliminary clearing steps.
• CUTS SAPLINGS UP TO 2 IN (5.1 CM) DIAMETER: The heavy-duty blade spindle can handle young woody growth and saplings measuring up to 2 in (5.1 cm) in diameter. This capability allows the machine to clear mixed vegetation containing grass, weeds, brush, and small saplings.
• BRIGGS & STRATTON OR HONDA ENGINE OPTIONS: Operators can select between the BC2600ICM with a 344 cc (21.0 cu in) Briggs & Stratton engine and the BC2601HM with a 388 cc (23.7 cu in) Honda engine. Both configurations use pull starting and the same heavy-duty mechanical drive system.
• UP TO 28,600 SQ FT/HR (2,657 M²/HR) PRODUCTIVITY: Both BC26 configurations are rated for productivity of up to 28,600 sq ft/hr (2,657 m²/hr). This coverage capability helps professional crews clear substantial areas of unwanted vegetation efficiently.

APPLICATIONS / USE CASES

• OVERGROWN FIELD CLEARING: The BC26 is designed to reclaim fields covered by dense grass, weeds, brush, and young saplings. Its 26 in (66.0 cm) rigid deck and reinforced blade spindle provide the durability needed for demanding vegetation removal.
• MEADOW MAINTENANCE: Property owners and maintenance crews can use the BC26 to control seasonal vegetation growth in meadows and naturalized areas. Three forward speeds allow operators to adjust ground speed as vegetation conditions change.
• PATH AND TRAIL CLEARING: The 26 in (66.0 cm) cutting width makes the machine useful for establishing and maintaining walking paths, access routes, and recreational trails. Reverse operation helps operators reposition the machine when navigating confined or heavily vegetated areas.
• TALL GRASS AND WEED CONTROL: The BC26 is designed to handle grass and weeds over 8 ft (2.44 m) tall. This makes it suitable for properties that have gone extended periods without mowing or routine vegetation management.
• BRUSH AND SAPLING REMOVAL: The reinforced cutting system tackles brush up to 6 ft (1.83 m) high and saplings up to 2 in (5.1 cm) in diameter. Operators can therefore clear mixed vegetation without relying on conventional finish-mowing equipment.
• VACANT AND NEGLECTED PROPERTY CLEANUP: Contractors can use the BC26 to reclaim lots and properties covered by uncontrolled vegetation. Its rigid deck and heavy-duty transaxle are designed for challenging areas where uneven terrain and dense growth may be encountered.
• MUNICIPAL AND PARK MAINTENANCE: Municipal maintenance crews can use the brush cutter for trails, naturalized park areas, rights-of-way, and other locations requiring periodic vegetation control. Commercial-duty construction supports recurring seasonal workloads.
• LANDSCAPE AND PROPERTY PREPARATION: The BC26 can remove unwanted vegetation before landscaping, property improvements, or other site work begins. Its ability to handle grass, brush, weeds, and small saplings makes it useful for initial site-clearing operations.

WHAT'S INCLUDED

• One Billy Goat BC26 Series Outback Fixed Deck 26 in (66.0 cm) Brush Cutter in the selected engine configuration
• Briggs & Stratton or Honda engine, depending on selected model
• Pull / recoil starting system
• 26 in (66.0 cm) commercial-duty rigid cutting deck
• Heavy-duty blade spindle reinforced in four directions
• Heavy-duty mechanical transaxle
• Three forward speeds and reverse
• Rubberized rear deck trim

The optional no-flat left or right wheel and tire is sold separately unless otherwise specified.

MACHINE OPTIONS

• BC2600ICM – BRIGGS & STRATTON: The BC2600ICM is powered by a 344 cc (21.0 cu in) Briggs & Stratton engine with pull starting. It combines the 26 in (66.0 cm) fixed cutting deck with the heavy-duty mechanical transaxle and weighs 316 lb (143.3 kg).
• BC2601HM – HONDA: The BC2601HM is powered by a 388 cc (23.7 cu in) Honda engine with pull starting. It provides the same 26 in (66.0 cm) fixed cutting width and mechanical drive configuration while weighing 325 lb (147.4 kg).

OPTIONAL ACCESSORIES

• WHEEL AND TIRE (LEFT OR RIGHT – NO FLAT): This optional left-side or right-side wheel and tire provides a no-flat configuration for compatible BC26 Series brush cutters. Eliminating pneumatic tire pressure maintenance can help reduce downtime caused by punctures or air loss when operating around brush, thorns, branches, and rough vegetation.

TECHNICAL SPECIFICATIONS – BC2600ICM (BRIGGS & STRATTON)

• MANUFACTURER: Billy Goat
• PRODUCT SERIES: BC26 Outback
• MODEL: BC2600ICM
• PRODUCT TYPE: Walk-behind brush cutter
• ENGINE BRAND: Briggs & Stratton
• ENGINE DISPLACEMENT: 21.0 cu in (344 cc)
• STARTER TYPE: Pull / recoil
• DRIVE: Mechanical
• TRANSMISSION: Heavy-duty sealed mechanical transaxle
• FORWARD SPEEDS: 3
• REVERSE: Yes
• CUTTING WIDTH: 26 in (66.0 cm)
• DECK TYPE: Fixed / rigid
• MAXIMUM BRUSH HEIGHT: Up to 6 ft (1.83 m)
• GRASS AND WEED CAPACITY: Over 8 ft (2.44 m) tall
• MAXIMUM SAPLING DIAMETER: Up to 2 in (5.1 cm)
• BLADE SPINDLE: Heavy-duty, reinforced in four directions
• MAXIMUM PRODUCTIVITY: 28,600 sq ft/hr (2,657 m²/hr)
• WEIGHT: 316 lb (143.3 kg)
• LENGTH: 81.5 in (207.0 cm)
• WIDTH: 30.75 in (78.1 cm)

TECHNICAL SPECIFICATIONS – BC2601HM (HONDA)

• MANUFACTURER: Billy Goat
• PRODUCT SERIES: BC26 Outback
• MODEL: BC2601HM
• PRODUCT TYPE: Walk-behind brush cutter
• ENGINE BRAND: Honda
• ENGINE DISPLACEMENT: 23.7 cu in (388 cc)
• STARTER TYPE: Pull / recoil
• DRIVE: Mechanical
• TRANSMISSION: Heavy-duty sealed mechanical transaxle
• FORWARD SPEEDS: 3
• REVERSE: Yes
• CUTTING WIDTH: 26 in (66.0 cm)
• DECK TYPE: Fixed / rigid
• MAXIMUM BRUSH HEIGHT: Up to 6 ft (1.83 m)
• GRASS AND WEED CAPACITY: Over 8 ft (2.44 m) tall
• MAXIMUM SAPLING DIAMETER: Up to 2 in (5.1 cm)
• BLADE SPINDLE: Heavy-duty, reinforced in four directions
• MAXIMUM PRODUCTIVITY: 28,600 sq ft/hr (2,657 m²/hr)
• WEIGHT: 325 lb (147.4 kg)
• LENGTH: 81.5 in (207.0 cm)
• WIDTH: 30.75 in (78.1 cm)

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What is the difference between the BC2600ICM and BC2601HM?

The BC2600ICM uses a 344 cc (21.0 cu in) Briggs & Stratton engine and weighs 316 lb (143.3 kg), while the BC2601HM uses a 388 cc (23.7 cu in) Honda engine and weighs 325 lb (147.4 kg). Both models use a 26 in (66.0 cm) fixed deck and heavy-duty mechanical transaxle.

2. What types of vegetation can the BC26 Series cut?

The BC26 is designed to tackle brush up to 6 ft (1.83 m) high, grass and weeds over 8 ft (2.44 m) tall, and saplings up to 2 in (5.1 cm) in diameter. It is intended for demanding areas where conventional finish-mowing equipment may not be suitable.

3. Does the BC26 Series have multiple speeds and reverse?

Yes. The heavy-duty mechanical transaxle provides three forward speeds and reverse. This allows operators to adapt travel speed to vegetation density and makes repositioning easier in challenging work areas.

4. What is the advantage of the rigid cutting deck?

The fixed deck does not articulate, helping reduce pulling and snagging when crossing hills, holes, and uneven ground. Its rigid construction also provides stability when cutting through deep vegetation.

5. How productive is the Billy Goat BC26 Series?

Both engine configurations are rated for productivity of up to 28,600 sq ft/hr (2,657 m²/hr). Actual coverage will vary with vegetation density, terrain, operator speed, and site conditions.