Billy Goat SG1301 Series Stump Grinder Accessories

Billy Goat SG1301 Series Stump Grinder Accessories provide replacement cutting components, auger teeth, pilot bits, drive adapters, and auger bits for compatible equipment configurations. These accessories are intended for contractors, landscapers, equipment service departments, and professional operators who need replacement wear components or specialized drilling attachments. Because several of these components are intended for auger and drilling applications rather than the standard SG1301 stump-grinding cutting wheel, equipment, drive, and attachment compatibility should be confirmed before ordering.

KEY FEATURES

• REPLACEABLE WEAR COMPONENTS: Individual teeth, inserts, and pilot bits allow worn cutting components to be serviced without replacing an entire compatible attachment. This helps simplify maintenance and can reduce downtime when cutting components become worn or damaged.
• MULTIPLE CUTTING MATERIAL OPTIONS: Selected components are available with dirt, hardfaced, or carbide configurations to support different compatible applications. This allows operators to select replacement components according to the attachment and working conditions.
• CARBIDE CUTTING OPTIONS: Carbide auger teeth, pilot bits, and other compatible components provide wear-resistant cutting surfaces for demanding applications. Replaceable carbide components make it easier to maintain cutting performance as individual parts wear.
• HARDFACED COMPONENT OPTIONS: Hardfaced teeth and pilot bits provide an alternative wear-resistant configuration for compatible equipment. These components are useful when servicing attachments originally designed for the corresponding hardfaced cutting system.
• MULTIPLE DRIVE ADAPTERS: Available adapters include 1-3/8 in (34.9 mm) hex and 1-1/4 in (31.8 mm) square configurations. These options accommodate compatible drive interfaces, but the required connection should always be verified before ordering.
• MULTIPLE AUGER BIT SIZES: Available dirt auger bits include 8 in (20.3 cm) and 12 in (30.5 cm) outside-diameter configurations. Different diameters allow operators to select an appropriate hole size when using compatible drilling equipment.
• PROFESSIONAL SERVICE OPTIONS: Individual replacement components make it easier for contractors, rental fleets, and service departments to maintain compatible equipment. Keeping appropriate wear parts available can reduce delays caused by worn cutting components.

APPLICATIONS / USE CASES

• REPLACEMENT CUTTING COMPONENTS: Individual teeth and inserts can replace worn components on compatible cutting assemblies. This allows operators to service high-wear parts while retaining reusable portions of the attachment.
• SOIL DRILLING: Dirt auger teeth, pilot bits, and complete dirt auger bits support soil-drilling applications when installed on compatible equipment. Operators should match the cutting components and drive interface to the specific drilling system.
• DEMANDING WEAR CONDITIONS: Carbide and hardfaced components provide alternative cutting surfaces for compatible applications where increased wear resistance is desired. Selecting the appropriate component helps maintain effective cutting performance and service life.
• PILOT BIT REPLACEMENT: Dirt, carbide, and hardfaced pilot-bit options allow compatible drilling assemblies to be serviced according to their original configuration and working conditions. Pilot bits help guide the cutting assembly as drilling begins.
• DRIVE CONNECTION ADAPTATION: Hex and square bit adapters provide connection options for compatible equipment and attachments. Correct sizing is important to ensure the attachment matches the intended drive system.
• LANDSCAPING AND PROPERTY MAINTENANCE: Compatible auger components can support soil-drilling tasks associated with professional landscaping and property maintenance. Available auger diameters provide options for different hole-size requirements.
• RENTAL AND SERVICE FLEETS: Replaceable wear components provide equipment rental businesses and service departments with options for maintaining compatible attachments. Stocking commonly required teeth, pilot bits, and adapters can help minimize equipment downtime.

WHAT'S INCLUDED

• One selected Billy Goat accessory or replacement component
• Insert where specifically identified as included with the selected tooth
• Dimensions and configuration according to the selected accessory

Each accessory is sold according to its individual product configuration. The Billy Goat SG1301 Series stump grinder, auger drive equipment, additional teeth, adapters, pilot bits, and other accessories are not included unless specifically stated with the selected item.

ACCESSORY OPTIONS

• TOOTH AUGER DIRT WITH INSERT: This replaceable auger tooth is designed for compatible dirt-drilling applications and includes an insert. It provides a service option for an appropriate auger cutting assembly; verify equipment compatibility before ordering.
• TOOTH AUGER HARDFACED WITH INSERT: This hardfaced auger tooth includes an insert and is intended for compatible drilling applications. Its wear-resistant cutting surface provides an alternative to standard auger teeth when servicing the appropriate equipment.
• WISDOM TOOTH (HARDFACE): This hardfaced replacement tooth provides a wear-resistant cutting option for a compatible tooth-holder assembly. Confirm its mounting requirements and intended equipment application before installation.
• WISDOM TOOTH (CARBIDE): This carbide replacement tooth provides a durable cutting option for compatible equipment. Its replaceable design allows operators to service worn cutting components without replacing the complete assembly.
• PILOT BIT (DIRT): This pilot bit is intended for compatible auger applications involving soil. It helps initiate and guide the cutting assembly during drilling when installed on the appropriate equipment.
• WELD-ON DRIVE LUG: This drive lug is intended for welded installation on a compatible drive assembly. It provides a replacement or fabrication component where the specified drive connection is required.
• TOOTH AUGER CARBIDE WITH INSERT: This carbide auger tooth includes an insert for compatible drilling equipment. The carbide cutting surface provides a wear-resistant option for demanding applications.
• PILOT BIT (CARBIDE): This carbide pilot bit provides a wear-resistant option for compatible auger cutting assemblies. It is intended to guide the auger during drilling while withstanding demanding cutting conditions.
• 1-3/8 IN (34.9 MM) HEX BIT ADAPTER: This adapter provides a 1-3/8 in (34.9 mm) hex connection for compatible drilling equipment. Verify the required drive interface and intended application before ordering.
• 1-1/4 IN (31.8 MM) SQUARE BIT ADAPTER: This adapter provides a 1-1/4 in (31.8 mm) square connection for compatible drilling equipment. It allows an appropriate bit or attachment to be connected when the equipment uses the matching drive interface.
• PILOT BIT (HARDFACE): This hardfaced pilot bit is intended for compatible auger applications requiring a wear-resistant cutting component. It helps guide the drilling assembly when installed on the correct equipment.
• AUGER BIT – 8 IN (20.3 CM) OD × 36 IN (91.4 CM) LONG, DIRT – RED: This red dirt auger bit has an outside diameter of 8 in (20.3 cm) and a length of 36 in (91.4 cm). It is intended for compatible soil-drilling equipment; confirm drive compatibility before ordering.
• AUGER BIT – 12 IN (30.5 CM) OD × 42 IN (106.7 CM) LONG, DIRT – RED: This red dirt auger bit has an outside diameter of 12 in (30.5 cm) and a length of 42 in (106.7 cm). Its larger diameter provides an alternative hole size for compatible drilling equipment.

TECHNICAL SPECIFICATIONS

• PRODUCT TYPE: Replacement cutting, auger, pilot-bit, drive-adapter, and drilling accessories
• COMPATIBILITY: Application-dependent; verify compatibility with the intended machine, attachment, holder, and drive system before ordering
• AVAILABLE TOOTH TYPES: Dirt, hardfaced, and carbide configurations
• AVAILABLE PILOT BIT TYPES: Dirt, carbide, and hardface configurations
• HEX BIT ADAPTER SIZE: 1-3/8 in (34.9 mm)
• SQUARE BIT ADAPTER SIZE: 1-1/4 in (31.8 mm)
• SMALLER DIRT AUGER BIT: 8 in (20.3 cm) OD × 36 in (91.4 cm) long
• LARGER DIRT AUGER BIT: 12 in (30.5 cm) OD × 42 in (106.7 cm) long
• AUGER BIT COLOR: Red
• INSERT AVAILABILITY: Included with accessory descriptions specifically identifying an insert
• INSTALLATION: Varies by selected component; some accessories require compatible holders, adapters, drive systems, or professional installation

FREQUENTLY ASKED QUESTIONS (FAQ)

1. Are all of these accessories installed directly on the SG1301 stump grinder?

No. Several of the listed components are intended for compatible auger or drilling systems rather than the standard stump-grinder cutting wheel. Confirm the intended equipment and attachment compatibility before ordering.

2. What cutting-material options are available?

The listed replacement components include dirt, hardfaced, and carbide configurations. The appropriate option depends on the compatible attachment, holder, and intended working conditions.

3. What drive adapter sizes are available?

The listed options include a 1-3/8 in (34.9 mm) hex bit adapter and a 1-1/4 in (31.8 mm) square bit adapter. The required connection should be matched to the drive system and attachment before purchase.

4. What sizes of dirt auger bits are listed?

The available dirt auger options listed here include an 8 in (20.3 cm) outside-diameter bit measuring 36 in (91.4 cm) long and a 12 in (30.5 cm) outside-diameter bit measuring 42 in (106.7 cm) long.

5. Do the replacement auger teeth include inserts?

The dirt, hardfaced, and carbide auger teeth specifically identified as being supplied with an insert include one as part of their listed configuration. For other components, do not assume that additional holders, inserts, adapters, or mounting hardware are included unless specifically stated.