HOC RM32 Tamping Rammer Handle Assembly Parts

HOC RM32 Tamping Rammer Handle Assembly Parts are replacement components for servicing and repairing the handle and control assembly of the RM32 tamping rammer. Use the main image diagram and corresponding reference number to identify the exact handle, shock absorber, throttle lever, control wire, mounting hardware, or other component required before ordering. These parts are intended for equipment owners, contractors, repair shops, and service technicians maintaining compatible HOC RM32 tamping rammers.

KEY FEATURES

• DIAGRAM-BASED PART IDENTIFICATION: Each handle assembly component corresponds to a numbered reference on the RM32 main image diagram. Matching the diagram number with the parts list makes it easier to identify the correct replacement component before ordering.
• COMPLETE HANDLE ASSEMBLY COVERAGE: Available parts include the handle, shock absorber, throttle lever, switch-off wire, throttle wire, side iron plate, bolts, washers, and fastening hardware. This allows individual components to be replaced according to the specific repair requirement.
• HANDLE AND VIBRATION COMPONENTS: The main handle and shock absorber are available individually for servicing worn or damaged operator-control components. Replacing these parts as required helps maintain the handle assembly and its connection to the machine.
• THROTTLE CONTROL COMPONENTS: The throttle lever and throttle wire are available separately for repairs to the engine speed control system. Diagram-based identification helps technicians select the required control component without replacing unrelated parts.
• SWITCH-OFF WIRE REPLACEMENT: A replacement switch-off wire is available for the applicable engine shutoff control connection. This allows technicians to service the control wiring individually when required.
• MOUNTING HARDWARE OPTIONS: Hex bolts, flat washers, and a hex flange nut are available as individual replacement components. This supports targeted repairs when mounting or fastening hardware is worn, damaged, or missing.

APPLICATIONS / USE CASES

• HANDLE ASSEMBLY REPAIRS: Replace worn or damaged components within the RM32 handle assembly using the numbered main image diagram for identification. Individual part availability supports targeted repairs without unnecessarily replacing the complete handle system.
• THROTTLE CONTROL SERVICE: The throttle lever and throttle wire can be replaced when servicing the machine's throttle control components. Matching the required component to its diagram number simplifies parts selection.
• SHOCK ABSORBER REPLACEMENT: The handle shock absorber is available separately for servicing the vibration-isolation portion of the handle assembly. This allows the affected component to be replaced while retaining other serviceable handle parts.
• HANDLE MOUNTING SERVICE: Replacement bolts, washers, flange nuts, and the side iron plate provide options for repairing handle mounting points. These components can be selected individually based on the corresponding diagram reference.
• SHOP AND FIELD MAINTENANCE: The numbered parts system helps repair shops and field technicians quickly identify components during maintenance. Using the main image diagram can also simplify communication when ordering replacement parts.

WHAT’S INCLUDED

• Selected HOC RM32 handle assembly replacement part
• Part supplied according to the selected diagram reference number

AVAILABLE HANDLE ASSEMBLY PARTS

HANDLE ASSEMBLY SET (#1-13)

• 1 - HEX BOLT: Replacement hex bolt corresponding to reference number 1 on the RM32 handle assembly diagram.
• 2 - FLAT WASHER: Replacement flat washer identified as reference number 2 for the applicable handle assembly fastening point.
• 3 - HANDLE: Replacement handle corresponding to reference number 3. This component forms the primary operator handle structure of the RM32 handle assembly.
• 4 - SHOCK ABSORBER: Replacement shock absorber identified as reference number 4. This component is used within the handle assembly to help isolate vibration between the machine and operator handle.
• 5 - HEX FLANGE NUT: Replacement hex flange nut corresponding to reference number 5 for securing the applicable handle assembly connection.
• 6 - THROTTLE LEVER: Replacement throttle lever identified as reference number 6. This component provides operator control of the machine's throttle through the connected throttle system.
• 7 - FLAT WASHER: Replacement flat washer corresponding to reference number 7 for the specified handle assembly mounting location.
• 8 - HEX BOLT: Replacement hex bolt identified as reference number 8 for securing the applicable handle or control component.
• 9 - SWITCH-OFF WIRE: Replacement switch-off wire corresponding to reference number 9. This component is used for the applicable engine shutoff control connection shown on the main diagram.
• 10 - THROTTLE WIRE: Replacement throttle wire identified as reference number 10. The wire connects the throttle control system to the applicable engine control mechanism.
• 11 - SIDE IRON PLATE HANDLE: Replacement side iron plate for the handle corresponding to reference number 11. This component supports the applicable handle mounting and structural connection shown on the diagram.
• 12 - FLAT WASHER: Replacement flat washer identified as reference number 12 for the applicable handle assembly fastening point.
• 13 - HEX BOLT: Replacement hex bolt corresponding to reference number 13 for securing the specified handle assembly component.

CAN BE PURCHASED SEPARATELY

• 3 - HANDLE: Replacement handle corresponding to reference number 3. This component forms the primary operator handle structure of the RM32 handle assembly.
• 4 - SHOCK ABSORBER: Replacement shock absorber identified as reference number 4. This component is used within the handle assembly to help isolate vibration between the machine and operator handle.
• 6 - THROTTLE LEVER: Replacement throttle lever identified as reference number 6. This component provides operator control of the machine's throttle through the connected throttle system.
• 9 - SWITCH-OFF WIRE: Replacement switch-off wire corresponding to reference number 9. This component is used for the applicable engine shutoff control connection shown on the main diagram.
• 10 - THROTTLE WIRE: Replacement throttle wire identified as reference number 10. The wire connects the throttle control system to the applicable engine control mechanism.

TECHNICAL SPECIFICATIONS

• COMPATIBLE MACHINE: HOC RM32 Tamping Rammer
• ASSEMBLY: Handle assembly
• PART IDENTIFICATION METHOD: Main image exploded-view diagram reference number
• AVAILABLE REFERENCE NUMBERS: 1 through 13
• CONTROL COMPONENTS: Throttle lever, throttle wire, and switch-off wire
• HANDLE COMPONENTS: Handle, shock absorber, and side iron plate handle
• FASTENING COMPONENTS: Hex bolts, flat washers, and hex flange nut

FREQUENTLY ASKED QUESTIONS

Q: How do I identify the correct RM32 handle assembly part?

Check the main image diagram and locate the reference number for the component you need. Match that number with the available handle assembly parts list before ordering.

Q: Are all 13 handle assembly parts included together?

No. The listed items represent individual replacement parts available for the RM32 handle assembly. Select the specific diagram reference number corresponding to the part required.

Q: Is the complete handle available separately?

Yes. The handle is listed as reference number 3. Verify the machine model and diagram reference before ordering to confirm the correct component.

Q: Are the throttle lever and throttle wire available separately?

Yes. The throttle lever is listed as reference number 6 and the throttle wire is listed as reference number 10. The switch-off wire is also available separately as reference number 9.

Q: What should I verify before ordering an RM32 handle assembly part?

Confirm that the machine is an HOC RM32 tamping rammer, then use the main image diagram to identify the required reference number. Match both the diagram number and part name with the listing before placing an order.