HOC RM32 Tamping Rammer Crankcase Assembly Parts

HOC RM32 Tamping Rammer Crankcase Assembly Parts are replacement components for servicing and rebuilding the crankcase section of the RM32 tamping rammer. Use the main image diagram and corresponding reference number to identify the exact crankcase, bearing, stop ring, connecting rod, seal, pinion, or other component required before ordering. These parts are intended for equipment owners, contractors, repair shops, and service technicians maintaining compatible HOC RM32 tamping rammers.

KEY FEATURES

• DIAGRAM-BASED PART IDENTIFICATION: Each crankcase component corresponds to a numbered reference on the RM32 exploded-view diagram. Matching the reference number before ordering helps simplify part selection and reduce identification errors.
• COMPLETE CRANKCASE COMPONENT COVERAGE: The available parts include the crankcase, bearings, stop rings, crank gear, connecting rod, washers, fasteners, seal, pinion, and related components. This allows individual worn or damaged parts to be replaced without automatically replacing the complete assembly.
• DRIVETRAIN REPAIR SUPPORT: Critical rotating components such as the crank gear, connecting rod, bearings, and pinion are available individually. This helps service technicians rebuild key crankcase components and restore proper mechanical operation.
• SEALING AND RETENTION COMPONENTS: O-rings, seals, stop rings, and washers are available for maintaining proper component positioning and sealing within the crankcase assembly. Replacing worn retention and sealing parts can help support dependable operation after service.
• RM32 COMPATIBILITY: These replacement components are intended for the HOC RM32 tamping rammer crankcase assembly. Always verify the machine model, exploded-view diagram, and reference number before selecting a replacement part.

APPLICATIONS / USE CASES

• CRANKCASE REBUILDING: Replace individual internal components when rebuilding the RM32 crankcase assembly. The numbered parts list helps technicians identify the required component directly from the main diagram.
• BEARING REPLACEMENT: Multiple bearings and associated stop rings are available for replacing worn crankcase support components. Proper bearing service helps maintain smooth rotation and component alignment.
• CRANK AND CONNECTING ROD SERVICE: The crank gear, connecting rod, pinion, and related hardware can be replaced individually during drivetrain repairs. This supports more targeted servicing of damaged or worn internal parts.
• SEAL AND O-RING SERVICE: Replacement O-rings and seals can be installed when leakage or deterioration is found during inspection. Replacing these components helps maintain proper sealing within the crankcase assembly.
• SHOP AND FIELD REPAIRS: The diagram-based numbering system helps repair shops and field technicians quickly communicate which part is required. This can simplify ordering and reduce downtime during maintenance.

WHAT’S INCLUDED

• Selected HOC RM32 crankcase assembly replacement part
• Part supplied according to the selected diagram reference number

AVAILABLE CRANKCASE ASSEMBLY PARTS

CRANKCASE ASSEMBLY SET A (#1-26)

• 1 - CRANKCASE: Replacement crankcase corresponding to reference number 1 on the RM32 crankcase assembly diagram.
• 2 - O-RING: Replacement O-ring identified as reference number 2 for the applicable crankcase sealing location.
• 3 - STOP RING: Replacement stop ring corresponding to reference number 3 for retaining the specified component in position.
• 4 - BEARING: Replacement bearing identified as reference number 4 for supporting rotating components within the crankcase assembly.
• 5 - STOP RING: Replacement stop ring corresponding to reference number 5 for the applicable bearing or rotating component.
• 6 - BEARING: Replacement bearing identified as reference number 6 for the RM32 crankcase assembly.
• 7 - STOP RING: Replacement stop ring corresponding to reference number 7 for retaining the associated internal component.
• 8 - CRANK GEAR: Replacement crank gear identified as reference number 8 for transferring mechanical motion within the crankcase assembly.
• 9 - BEARING: Replacement bearing corresponding to reference number 9 for supporting the crank gear or associated rotating component.
• 10 - STOP RING: Replacement stop ring identified as reference number 10 for the specified internal retention point.
• 11 - STOP RING: Replacement stop ring corresponding to reference number 11 for securing the associated crankcase component.
• 12 - CONNECTING ROD: Replacement connecting rod identified as reference number 12 for transmitting motion within the rammer drivetrain.
• 13 - BEARING: Replacement bearing corresponding to reference number 13 for supporting the connecting rod or related rotating assembly.
• 14 - STOP RING: Replacement stop ring identified as reference number 14 for retaining the associated component.
• 15 - FLAT WASHER: Replacement flat washer corresponding to reference number 15 for the applicable crankcase hardware connection.
• 16 - SPRING WASHER: Replacement spring washer identified as reference number 16 for maintaining fastening tension within the assembly.
• 17 - HEX BOLT: Replacement hex bolt corresponding to reference number 17 for securing the specified crankcase component.
• 18 - CYLINDRICAL WASHER: Replacement cylindrical washer identified as reference number 18 for the applicable assembly position.
• 19 - HEX BOLT: Replacement hex bolt corresponding to reference number 19 for crankcase assembly fastening.
• 20 - NOZZLE: Replacement nozzle identified as reference number 20 for the specified crankcase location.
• 21 - STOP RING: Replacement stop ring corresponding to reference number 21 for internal component retention.
• 22 - R. COVER CRANKCASE: Replacement right crankcase cover identified as reference number 22 for enclosing and protecting the crankcase assembly.
• 23 - BEARING: Replacement bearing corresponding to reference number 23 for supporting the applicable rotating component.
• 24 - STOP RING: Replacement stop ring identified as reference number 24 for securing the associated bearing or internal component.
• 25 - SEAL: Replacement seal corresponding to reference number 25 for maintaining proper sealing at the specified crankcase location.
• 26 - PINION: Replacement pinion identified as reference number 26 for transferring rotational motion within the RM32 crankcase drivetrain.

CAN BE PURCHASED SEPARATELY

• 6 - BEARING: Replacement bearing identified as reference number 6 for the RM32 crankcase assembly.
• 8 - CRANK GEAR: Replacement crank gear identified as reference number 8 for transferring mechanical motion within the crankcase assembly.
• 12 - CONNECTING ROD: Replacement connecting rod identified as reference number 12 for transmitting motion within the rammer drivetrain.
• 13 - BEARING: Replacement bearing corresponding to reference number 13 for supporting the connecting rod or related rotating assembly.
• 22 - R. COVER CRANKCASE: Replacement right crankcase cover identified as reference number 22 for enclosing and protecting the crankcase assembly.
• 23 - BEARING: Replacement bearing corresponding to reference number 23 for supporting the applicable rotating component.
• 26 - PINION: Replacement pinion identified as reference number 26 for transferring rotational motion within the RM32 crankcase drivetrain.

TECHNICAL SPECIFICATIONS

• COMPATIBLE MACHINE: HOC RM32 Tamping Rammer
• ASSEMBLY: Crankcase assembly
• PART IDENTIFICATION METHOD: Exploded-view diagram reference number
• AVAILABLE REFERENCE NUMBERS: 1 through 26
• PART TYPES: Crankcase, O-ring, stop rings, bearings, crank gear, connecting rod, washers, bolts, nozzle, crankcase cover, seal, and pinion

FREQUENTLY ASKED QUESTIONS

Q: How do I identify the correct RM32 crankcase part?

Check the main exploded-view image and locate the numbered component you need. Match that reference number to the crankcase assembly parts list before ordering.

Q: Are all 26 crankcase parts included together?

No. The list represents individual replacement parts available for the RM32 crankcase assembly. Select the specific reference number and part required for your repair.

Q: Are bearings available individually?

Yes. Bearings are listed under reference numbers 4, 6, 9, 13, and 23. Always match the exact diagram location and reference number before ordering.

Q: Can I replace the crank gear and connecting rod separately?

Yes. The crank gear is listed as reference number 8 and the connecting rod as reference number 12. Individual availability allows more targeted drivetrain repairs.

Q: What should I verify before ordering a crankcase replacement part?

Verify that your machine is an HOC RM32 tamping rammer and compare the required component with the main image diagram. Use both the diagram reference number and part name to confirm the correct selection.